Fig. 8:
Intermediate position on the bus
1.2.2.2 Connecting the antenna
The ATLAS 50 router has two connectors for external antennas, which improve the quality of the signal received and
transmitted through the Wireless LAN module. This module is optional. Your device may not have Wireless LAN and,
consequently, no antennas. To assemble and disassemble the antennas, simply screw them into the connectors
labeled as ANT (located on the rear of the device).
1.2.2.3 Connecting for configuration
The ATLAS 50 router has a RJ45 female connector on the front panel referred to as “ CONF.”, which provides ac-
cess to the device local console. In order to configure this, you must connect the “ CONF.” port to an asynchronous
terminal (or to a PC with terminal emulation).
Note
Configuration for the terminal must be:
- Speed: 9600 bps.
- Eight data bits.
- One stop bit.
- No parity bit.
- No type of flow control.
Connection to the configuration port can be carried out using the RJ45 connectors cable, provided with the device,
and the RJ45 Female-DB9 Female adapter (also provided with the device).
1 Installing the Router
Teldat S.A.
6
ATLAS 50
