ATLAS X60
Installation
I-11
Doc.
Dm695-I
Rev.
1.0
System Info:
PCB:0x110 GPPORCR:0x10000003 PVR:0x80210020 SVR:0x80390020
CLKs(KHz): CPU=983040 DDR=196608 LBUS=49152 PCI1=65536 PCI2=32768
Watchdog: Disabled
MMU Mode: Dynamic
ICache: ON; DCache: ON Write-Back; L2Cache: ON
CPU fan speed: 941 rpm
Case fan speed: 941 rpm
Mem Info:
DRAM size: 512 Megabytes
BANK 0: 512 Megabytes (detected)
FLASH: 16 Mb.
NVRAM: 128 Kb.
EEPROM: 2048 Bytes.
Devices:
GIGABIT ETHERNET 1
GIGABIT ETHERNET 2
SECURITY ENGINE
PCI device: PowerPC processor, Host
(Bus: 0, Device: 0, Function: 0)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
Slot 1 - PCI device: CardBus bridge
(Bus: 0, Device: 10, Function: 0)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
PCI device: PowerPC processor, Host
(Bus: 10, Device: 0, Function: 0)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
Current production date: 07 45
Current software license: 18 92
Current serial number: 591/05411
BIOS MAC Add: 00-a0-26-10-95-23
>>
...
......
TRYING APP CODE DUMP
(CONFIGURED) ATLAS3G.BIN ver.: 0.10.7.12 0.0.0.0. .............................
APP DATA DUMP ....................................................................
Bios-stack used: 0x1588
Bios-stack free: 0x2A78
Aux-stack used: 0x13C
Aux-stack free: 0x1EC4
Running application
Default configuration used
Parsing text mode configuration ...
Configuration parsed
Initializing
Press any key to get started
•
On reaching this point, you can set microswitch ‘5’ in the OFF position
so that the next time you restart the device, the saved configuration is
adhered to.
•
Finally, close the device again.
