![Telcom Research CallShop FONE DISPLAY Installation & Protocol Manual Download Page 22](http://html1.mh-extra.com/html/telcom-research/callshop-fone-display/callshop-fone-display_installation-and-protocol-manual_1079427022.webp)
A7- 3375 North Service Road, Burlington ON Canada L7N 3G2
Phone
+905.336.2450
Fax
+647-436-6954
Web
www.telcomresearch.com
Page 21
The CallShop Concentrator has a total of 5 AC Adapter Jacks. The jacks labeled
Port Power
1 to 4 are used to provide AC power (via the Fone Display Port Cable) to each Fone Display.
The 5
th
AC Adapter Jack is for powering of the Concentrator itself.
The serial connection from the CallShop Concentrator to the PC is via a standard RJ45
network patch cable and an RJ45 to DB9 adapter. This
RJ45 to DB9 Adapter
may be
obtained directly from Telcom Research, or can be built from a generic adapter. The
connection information for making your own adapter is below:
Because the CallShop Concentrator is communicating with multiple Fone Display’s, the
single serial connection must be set much faster than the Fond Displays 2400 baud. The
correct settings for the Concentrator are:
9 Pin Concentrator Adapter
DB9
Male
or DB9
Female
DB9 Signal
Adapter
Color
Adapter
Pin
Number
1
DCD
-
N/C
2
RXD
Black
1
3
TXD
Yellow
4
4
DTR
5
5
GND
Red
6
6
DSR
White
N/C
7
RTS
-
N/C
8
CTS
Blue
N/C