A7- 3375 North Service Road, Burlington ON Canada L7N 3G2
Phone
+905.336.2450
Fax
+647-436-6954
Web
www.telcomresearch.com
Page 9
Mode, the “Amount” is immediately added to the Cost Counter.
Z
= Optional command to control the Duration Counter.
If this character exists and is an “R” then the duration counter
will be reset to zero.
Response:
^B
<CR>
The CallShop Fone Display will respond with this confirmation message
Example:
B1CR
<CR>
This will cause both the Duration Counter and the Cost Counter to begin
timing and pricing a call. The Duration counter will be reset to zero at the
start and the Cost Counter will be cleared. In Standard Cost Mode this means
setting the Cost Counter to zero. In Prepaid Cost Mode, this means presetting
the Cost Count to Prepaid amount.
B0
<CR>
This will cause both the duration counter and the cost counter to stop
counting.
B1S<CR>
This will cause both the duration counter and the cost counter to start
counting. Neither counter will be altered first, so that if there was a duration
on the Duration Counter, it will simply be added to. Likewise if a cost already
existed on the Cost Counter (from a previous call) then the counter will
simply add to this cost. This is usually used when you want to show the user
the total duration and cost of all his calls, and this command would be used to
start second or subsequent call.
View Digits Dialed:
The “V” command displays the “Digits Dialed” field on the LCD at the location of your
choice.
Format:
VRCC
<CR>
V
= “V”
R
= Row (1 for line 1 and 2 for line 2)
CC
= Column (01 to 16)
Response:
^V
<CR>
The CallShop Fone Display will respond with this confirmation message
Example:
V203
<CR>
Display the digits dialed field on line 2 starting at column 3 of the LCD
display.
V000
<CR>
Turn off the digits dialed field.
