TelcoBridges Tmedia TMG800, Installation Manual

Page: 16 / 80

8
TMG800 and 1 Installation Guide
2.2 Rack Mounting the Tmedia Equipment
The Tmedia equipment is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box.
2.2.1 Prerequisites
To rack mount the Tmedia equipment, you will need:
• One 19” customer-provided equipment rack. The rack must be solidly anchored to the floor with
appropriate support at the top of the racks.
• Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
2.2.2 Vertical Placement of Tmedia Equipment
The TMG800 and 1 are each housed in a 1U chassis, as tabulated in table 2.2 on page 8. It
is important that you provide for enough room on the equipment rack to allow for the installation of the
TMG800 and 1.
Consider the available space on your equipment rack and the height of the TMG800 and 1.
Due to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave
any physical vertical space above or below the TMG800 and 1 on the equipment rack.
Table 2.2 Tmedia VoIP Gateway Physical Height
Tmedia Model Number Vertical Height
TMG800 1U (1.75 inches or 44.45 mm)
1 1U (1.75 inches or 44.45 mm)
Patch Panel 1U (1.75 inches or 44.45 mm)