TELCO FABRIKKER AS
N.7580 Selbu, Norge
Phone + 47 73 81 20 90 Fax: +47 73 81 74 95 e-mail: [email protected]
Trouble shooting instructions for marine heater T2RIB
If the heater is not longer working, check this:
T2RIB have a built-in safety system, a thermal cut-out, to prevent the heater from overheating. This mechanism will
switch off the power should the heater become covered. If this happens, remove the item covering the heater and press the
reset button to restart the heater. The reset button is located on the right end side of the heater.
Any problem that can’t be fixed by resetting the thermal cut-out, please contact the producer:
Telco Fabrikker AS
Ausa industriområde
7580 Selbu
NORWAY
Phone: +47 73 81 20 90
Fax: + 47 73 81 74 95
E-mail: [email protected]
Information about utilization of marine heater T2RIB
‐
Heaters do not contain any parts or particles made of hazard materials and cannot make any harm to the
environment.
‐
Heaters should not be utilized with household waste.
‐
Heaters should be utilized in according to local Regulations and Standards.
Information about warranty of marine heater T2RIB
‐
Telco Fabrikker AS offer a two-year warranty on all our products.
