TEL AFA1000/BLD, Installation & Operating Manual

Page: 11 / 43

Version 01 / p.11
AFA1000/BLD Pressure Controller
Installation & Operating Manual
2.2 Display Features
The Pressure Monitor display has the following features:
The digital display is a backlit, full colour high resolution graphic unit with a visual display area of
approx 45 x 34mm. The display operates through the software allowing the generation of figures,
wording and icons. The display background colour can be provided as either Blue or Black.
The display shows the static pressure in Pa or In Wg when enabled or the alternative with no
pressure reading but showing AIR FAIL / AIR SAFE as continuous display. All of the above are
configurable via the alarm key pad.
The displayed pressure colour will change when in an alarm condition:-
Air Safe = White / Low or High Air Alarm = Red / Warning Air Alarm = Amber.
An ‘event time line ’ segmented into 60 x 1 minute segments will scroll across the display (when
enabled) .This takes the form of a graphical scale ranged over 0-1.00 m/sec that will progress from the
right hand side to the left hand side of the screen – representing the airflow value at each segment.
The segment colour will change if the value is in the range of an airflow alarm:-
Air Safe = White / Low or High Air Alarm = Red / Warning Air Alarm = Amber.
The alternative to the event time line is a dynamic ‘bar graph’ representing the control output.
The display shows a Horn icon (with line through it) when the audible alarm is in the Muted condition.