background image

 

22

12.0  LIMITATION OF WARRANTY AND LIABILITY 

 

Seller warrants that this product, under normal use and service as described in the operator’s manual shall be free from 
defects in workmanship and material for a period of 2 years (24) months, or the length of time specified in the operator’s 
manual, from the date of shipment to the customer. This limited warranty is subject to the following exclusion :- 

 

a. 

Batteries and certain other components when indicated in specifications are warranted for a period of 90 
days from the date of shipment to the customer. 

b. 

With respect to any repair services rendered, Seller warrants that the parts repaired or replaced will be 
free from defects in workmanship and material, under normal use, for a period of 90 days from the date of 
shipment to the customer 

c. 

Seller does not provide any warranty on finished goods manufactured by others. Only the original 
manufacturer’s warranty applies. 

d. 

Unless specifically authorised in a separate writing by Seller, Seller makes no warranty with respect to, 
and shall have no liability in connection with, any goods  which are incorporated into other products or 
equipment by the Buyer. All goods returned under warranty shall be at the Buyer’s risk of loss, Seller’s 
factory prepaid, and will be returned at Seller’s risk of loss, Buyer’s factory prepaid. 

 
The foregoing is IN LIEU OF all other warranties and is subject to the conditions and LIMITATIONS stated herein. NO 
OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS 
MADE. 
 
THE EXCLUSIVE REMEDY OF THE USER OR PURCHASER, AND THE LIMIT OF LIABILITY OF SELLER FOR ANY 
AND ALL LOSSES, INJURIES, OR DAMAGES IN CONNECTION WITH THIS PRODUCT ( INCLUDING CLAIMS BASED 
ON CONTRACT NEGLIGENCE, STRICT LIABILITY, OTHER TORT, OR OTHERWISE ) SHALL BE THE RETURN OF 
THE PRODUCT TO THE FACTORY OR DESIGNATED LOCATION AND THE REFUND OF THE PURCHASE PRICE, 
OR, AT THE OPTION OF THE SELLER, THE REPAIR OR REPLACEMENT OF THE PRODUCT. IN NO EVENT SHALL 
SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.SELLER SHALL NOT BE 
RESPONSIBLE FOR INSTALLATION, DISMANTLING, REASSEMBLY OR REINSTALLATION COSTS OR CHARGES. 
NO ACTION, REGARDLESS OF FORM, MAY BE BROUGHT AGAINST THE SELLER MORE THAN ONE YEAR AFTER 
THE CAUSE OF ACTION HAS ACCRUED. 
 
The purchaser and all users are deemed to have accepted the terms of this LIMITATION OF WARRANTY AND 
LIABILITY, which contains the complete and exclusive limited warranty of Seller. This LIMITATION OF WARRANTY AND 
LIABILITY may not be amended or modified nor may any of its terms be waived except by a  writing signed by an 
authorised representative of the Seller. 

 

13.0  Contact us :-

 

 

For further information on our range of airflow alarms and controls please 
contact us at :- 
 

 
 

HSE 

 
 
 
 

  

TEL 

H

OLLAND 

S

AFETY 

E

QUIPMENT

 

726 McKinley Ave. 
Libertyville, Illinois 60048 
Phone

 :   847- 680-9930    

Fax

 : 847-680-9938  

e-mail:      

[email protected] 

web site

:   

www.hollandsafety.com

 

Temperature Electronics Ltd

 

Export sales :- 
Tel

 :  + 44 161 257 2541     

Fax

 :  + 44 161 228 8817 

e-mail:         

[email protected] 

web site:

      

www.tel-uk.com

 

Summary of Contents for AFA 1000























Reviews: