12 / 49
Operating
Standby Mode and Operational Mode
The “PWR” LED next to the Power button on the front panel indicates the power state of the Multiviewer
Switcher. This indicator remains illuminated as long as power is being supplied to the Multiviewer
Switcher. If this indicator does not illuminate, check the connection between the power receptacle on
the Multiviewer Switcher and the AC outlet.
In Standby mode the Standby indicator will light up until the Multiviewer Switcher wakes up. When the
normal work mode is used, the Standby indicator will turn off. There three methods to wake up the
device include the following: pressing the Standby button, pressing the ON/OFF button on the IR
remote or using LAN or RS232 commands.
Screen layout Configuration
The Multiviewer Switcher offers four window configurations: quadruple windows, triple windows, double
windows, and single window. The screen configuration is shown as follows.
