Performance Verification
4- 46
WVR610A & WVR611A Waveform Rasterizers Service Manual
9.
Connect the
AES B 1--2 I/O
connector to the digital audio analyzer
unbalanced (UNBAL) input using a 75
Ω
cable.
10.
Set the audio analyzer for measurement of jitter per AES3--1992 (or 1997).
11.
Allow the jitter reading to settle for a few seconds.
12.
Check for a typical Jitter Peak absolute reading of less than 3.5 ns over an
interval of at least 5 seconds, and record the pass/fail result in the test record.
13.
Move the cable to each of the remaining AES B I/O connectors and repeat
steps 9 through 12 for each AES B I/O connector.
14.
Disconnect the test setup.
This test measures AES level meter accuracy over the audio frequency range.
Typical Operation Check.
This test checks for typical operation. Typical values are
not guaranteed characteristics and are listed in the test record as pass / fail.
1.
Press
FACTORY
.
2.
Set the digital audio generator as follows:
H
Frequency
100 Hz
H
Output Level
--6 dB FS Audio Tone
H
Sample Frequency
48 kHz
3.
Press and hold
4
to display the AUDIO pop-up menu.
4.
In the
Audio Input
submenu, select
AES A
.
5.
Connect the digital audio generator unbalanced (UNBAL) output to the
AES
A 1--2 In
connector using a 75
Ω
cable.
6.
Check for an indication of –6 dB FS
¦
0.2 dB in the corresponding bars and
record the pass/fail result in the test record.
7.
Move the audio generator output to each of the remaining
AES A In
connectors and repeat step 6 for each connector.
8.
Set the digital audio generator as follows:
H
Frequency
1 kHz
H
Output Level
--6 dB FS Audio Tone
H
Sample Frequency
48 kHz
9.
Repeat steps 5 through 7.
AES Audio Level Meter
Accuracy Over Frequency
(Options DG and DA Only)
Summary of Contents for WVR610A
