Functions
Functions
Gain, Sweep, and Magni
fi
cation
Set the gain, sweep mode, and sweep rate using the
GAIN
,
SWEEP
, and
MAG
buttons. A lit front-panel button indicates that the function is active.
NOTE.
Gain, Sweep, and Magni
fi
cation do not apply to all display types.
To Set Gain
Use Gain with the WFM, VECTOR, and Bowtie displays.
Select a trace display.
Press and hold the
GAIN
button to display the Gain pop-up menu.
If you enable
VAR Gain
, set the gain using the General knob. If you select
Gain Settings
, choose the gain (x2, x5, x10) of your choice.
After you have set up Gain parameters, you only need to press the
GAIN
button
once to activate Gain. Press it again to remove Gain.
To Set Sweep Mode
Use Sweep with the WFM and Bowtie displays.
Select a trace display.
Press and hold the
SWEEP
button to display the Sweep pop-up menu.
Select Line or Field sweep. The available options depend on which display is
active. For example, when the WFM Display is in Overlay mode, you can
select from either Line or Field. When that same display is in Parade, only
Line is available.
After you have set up Sweep parameters, you only need to press the
SWEEP
button once to activate Sweep. Press it again to remove Sweep.
WVR5200 Waveform Rasterizer User Manual
83
Summary of Contents for WVR5200 Series
