Audio Monitoring
To Check Surround Sound
Your instrument can also display the surround sound listening environment. The
following procedures help you get started.
1.
Open the audio display in one tile and select the input containing the surround
audio. (See page 119,
2.
Select
Aux Display
and then select
Surround Sound Display
. Press
SEL
or
the right-arrow key to turn the phase display on.
3.
Set the Audio Input to match the signal that you are checking.
NOTE.
If you want the level bars labeled with their surround sound channel
names instead of channel numbers, select
Srnd
(Surround) when you con
fi
gure
the audio inputs. (See page 119.)
4.
Set the surround
Dominance indicator
to
ON
or
OFF
.
5.
Set the
Loudness Filter
to the type preferred. A-Weighting biases the
response toward that of human hearing.
6.
Use the level bar display to monitor level control. (See page 120,
7.
Use the surround display to monitor relative loudness of the individual
elements rendered in a surround-sound listening environment. Check the
surround sound display for performance parameters and indicators. (See
Figure 58.)
WVR5200 Waveform Rasterizer User Manual
123
Summary of Contents for WVR5200 Series
