Audio Monitoring
Audio Monitoring
Your instrument can monitor embedded audio signals if it has Option AUD
installed. It can measure levels, monitor phase, display phase correlation, and
monitor surround-sound audio. You can specify meter ballistics and scales, set
test and peak program indicator levels, and specify how phase is displayed.
NOTE.
The audio monitoring features described in this chapter requires that
Option AUD be installed. For a list of the options currently installed on your
instrument, press the
CONFIG
button. In the con
fi
guration menu, select
Utilities
.
The
View Options
entry lists the installed options.
Con
fi
guring Audio Inputs
Audio inputs come set to factory defaults. As a result, you may need to con
fi
gure
them before performing the audio monitoring procedures in this section. The
fi
rst procedure helps you con
fi
gure the inputs. After you have completed that
procedure, check that the alarms are con
fi
gured as you want them. Your setup
here determines, in part, which audio-signal characteristics are displayed.
To Set Up an Audio Input
1.
Press the
CONFIG
button to display the con
fi
guration menu.
2.
Select
Audio Inputs/Outputs
and select the input to be con
fi
gured.
3.
Select from
Srnd (Surround)
for a
5.1
or
5.1+2
type display, or
Pairs
for a
stereo with SAP and discrete channels
type installation.
4.
Select
Bar to Input Map
and select which input pair should be displayed
in each bar pair.
5.
Select which inputs are allowed to generate alarms.
6.
Select the box to return to the Con
fi
guration menu.
7.
Repeat these sets for any other Audio inputs.
Selecting Audio Inputs
You select the audio input to be monitored from the front-panel
AUDIO
button
pop-up menu. Note that the Audio display can appear in only one tile at a time.
1.
Select a tile.
2.
Press and hold the
Audio
button to open the Audio display in a tile and pop
up the Audio menu.
WVR5200 Waveform Rasterizer User Manual
119
Summary of Contents for WVR5200 Series
