Audio Monitoring
3.
Use the Arrow Keys and
SEL
button to make selections in the steps that
follow.
4.
Select
Audio Input
and then select one of the audio input options shown.
NOTE.
The available selections depend on the installed audio option. Selecting
Follows Video selects the audio to video mapping set in the con
fi
guration menu.
To Check Audio Level and Phase
Level meters are vertical bar graphs on which the height of the bar indicates the
amplitude of the audio program in the corresponding input channel. Use the
Audio pop-up menu to change the input and turn on and off the Phase display.
Other meter characteristics such as ballistics, scale units, and program and test
levels are con
fi
gured through the Con
fi
guration menu.
If your instrument is equipped with optional audio features, it can display phase
of one input pair as a Lissajous pattern, and display relative phase on all four
pairs of inputs with correlation meters.
To Check Audio Level
1.
Open the audio display in one tile and select an input. (See page 119,
2.
Check the level meter bars for current audio levels, which are displayed
according to the selected meter ballistics. Each bar displays three colors.
(See Figure 56.)
Green – Indicates audio levels below the test level.
Yellow – Indicates audio levels between the test and peak program level.
Red – Indicates audio levels above the peak program level.
120
WVR5200 Waveform Rasterizer User Manual
Summary of Contents for WVR5200 Series
