Functions
To Set Magni
fi
cation
Use Magni
fi
cation with the WFM, VECTOR, and Bowtie displays.
Select a trace display.
Press and hold the
MAG
button to display the Magni
fi
cation pop-up menu.
Select a magni
fi
cation setting, such as Best View, x10, x20, x25, or x30. In
the Vector displays, the magni
fi
cation is called H Gain (horizontal gain). The
available options depend on which display is active.
After you have set up Magni
fi
cation parameters, you only need to press the
MAG
button once to activate Magni
fi
cation. Press it again to remove Magni
fi
cation.
Cursors
Cursors enable you to measure time or voltage on a waveform. Cursors appear
only in a tile set to Waveform mode. If the active tile is not in Waveform mode,
then an error message is displayed.
Display and adjust the cursors as follows:
1.
Choose a tile that is currently displaying a waveform.
2.
Press and hold the
CURSOR
button to display the cursor menu and then
select the cursor style you want:
Voltage
,
Time
, or
V Time
. (After
the cursors are activated and the pop-up menu is closed, pushing
CURSOR
again turns the cursors off.)
3.
Push the arrow keys to select the active cursor:
If Voltage or Time cursors are displayed, press any arrow key to activate
a cursor.
If V Time cursors are both displayed, press either the up or down
arrow key to select between voltage cursors. Press either the left or right
arrow key to select between the time cursors.
4.
Turn the
GENERAL
knob to adjust the selected cursor on the waveform. The
active cursor readout appears in yellow with a knob icon.
NOTE.
To quickly center the active cursor on screen, press and hold the
SEL
button.
5.
Repeat steps 2 through 4 to adjust the other cursor.
84
WVR5200 Waveform Rasterizer User Manual
Summary of Contents for WVR5200 Series
