Tektronix WFM2200A, User Manual

Page: 104 / 276

■ H and V positions: When you press the POS button to adjust the position of
the waveform, a position readout appears with a knob icon to indicate
whether the horizontal or vertical position is the focus of the General knob.
■ Field and line numbers: Shows the currently selected video field and line
numbers when Line Select mode is enabled. See Line Select on page 159.
Measure pop-up menu
(Bowtie display)
Press and hold the MEAS button to open the Measure pop-up menu. The pop-up
menu enables you to configure the display type and configure display parameters
for the different display types. The following menu selections are available:
Display type.
Select from the following display types:
■ Timing Measure - Displays a Tektronix proprietary view that enables you to
easily compare and correct the timing between two signals. See Timing
Measure display on page 136.
■ Datalist (Option DATA only) - Displays the content of all digital signal
formats, structures, and transports (SD, HD, 3G, dual link, 4:2:2, 4:4:4, and
others) except for composite signals. See
Datalist display (Option DATA
only) on page 83.
■ Bowtie - Displays the interchannel timing between Y Pb and Y Pr.
■ ANC Data (Option DATA only) - Displays all of the ANC data in a video
signal. See ANC Data display (Option DATA only) on page 48.
■ AV Delay (Option AVDP only) - Displays results of AV Delay and
Propagation Time measurements. See AV Delay Measurement display
(Option AVDP only) on page 78.
■ ASI PID List Disp. (WFM2300 Option ASI only) - For MPEG2 transport
stream inputs, displays the MPEG TS PID tree with each stream element
having an LED icon to indicate the status of the element. See
ASI PID List
display (WFM2300 Option ASI only) on page 54.
Parade overlay.
Select how the waveform appears by selecting Parade or
Overlay .
Center waveform. Select this option to cancel any horizontal or vertical position
adjustments and restore the trace to the default position.
Display modes
82 WFM2300 and WFM2200A Waveform Monitors User Manual