Tektronix WFM2200A, User Manual

Page: 105 / 276

CONFIG menu
Use the CONFIG menu to set the following Bowtie display parameters:
■ Set the Graticules & Readouts > Waveform Readouts setting to On or Off
to turn on or off the readouts on the display.
■ Use the menu selections under Display Settings to set various general
display parameters which affect all applicable display modes such as
waveform intensity, graticule color, and enabling the thumbnail view.
To position the
Bowtie trace
To adjust the position of the trace on the Bowtie display:
1. Press the POS button.
2. Press the left or right arrow key to enable horizontal or vertical adjustments.
The knob icon appears next to the selected adjustment readout.
3. Turn the General knob or use the up/down arrow keys to adjust the position
of the waveform.
4. Press the POS button to turn off the position adjustment mode.
Datalist display (Option DATA only)
The Datalist display allows you to see SD, HD, or 3G (Option 3G only) data
without any interpolation. The Datalist tool examines the contents of all digital
formats, structures, and transports (SD, HD, dual-link, 3 Gb/s, 4:2:2, 4:4:4, and
others). Datalist works for all signals except composite signals (analog NTSC and
analog PAL). From the display screen, you can select and isolate specific lines
and words from the video or data stream.
To access the
Datalist display
1. Press and hold the MEAS button to open the Measure pop-up menu.
2. Use the arrow keys to select Display Type > Datalist Display .
3. Press the MEAS button to close the pop-up menu.
Display modes
WFM2300 and WFM2200A Waveform Monitors User Manual 83