Installation instructions
Figure 3: RM1 assembly
RM1 assembly procedure
1.
Remove the
fl
exible boot that surrounds and protect the front end of the
instrument.
2.
Remove the two T25 screws from each side of the instrument (a total of 4
screws).
3.
Attach the right handle bracket to the right (outside) side of the instrument
using two of the screws removed in step 1.
4.
Attach the left handle bracket to the left (outside) side of the instrument using
the two remaining screws removed in step 1.
WARNING.
To reduce the risk of injury or damage to the instruments that might be
caused by dropping the instruments or loading them into the rack incorrectly, use
two people to place and secure the instruments into the rack.
6.
Place and secure the mounted instrument in the rack.
6
TSG4100A Series RM1 and RM2 Rackmount Kit Instructions
