Installation instructions
RM2 assembly procedure
1.
Remove the
fl
exible boots that surround and protect the front ends of the
instruments.
2. Part 1
: Attach the interior brackets to the two instruments as follows. (See
a.
Remove the two T25 screws from each side of each instrument (a total
of 8 screws).
b.
Place the two instruments side by side and facing the same direction on
your work table.
c.
Attach the interior bracket to the left (inside) side of the instrument on the
right using two sockethead screws.
d.
Attach the interior bracket to the right (inside) side of the instrument on
the left using two sockethead screws.
3. Part 2 and Part 3
: Connect and secure the two instruments as follows. (See
a.
Connect the interior brackets by moving one of the instruments and
sliding the interior brackets together until they lock.
b.
Attach the right handle bracket to the right (outside) side of the instrument
on the right using two of the screws removed in step 2 a.
c.
Attach the left handle bracket to the left (outside) side of the instrument
on the left using two of the screws removed in step 2 a.
d.
Use two T15 screws to secure the plate to the top of the interlocking
brackets that hold the two instruments together.
WARNING.
To reduce the risk of injury or damage to the instruments that might be
caused by dropping the instruments or loading them into the rack incorrectly, use
two people to place and secure the instruments into the rack.
4.
Place and secure the mounted instrument in the rack.
TSG4100A Series RM1 and RM2 Rackmount Kit Instructions
9
