Restoring and Reinstalling Software
Reinstalling the TLA Application Software
Complete the following steps to reinstall the latest version of the TLA application
software. Use these steps as a
fi
rst resort to recovering from application software
problems. If you still experience problems you may have to restore the hard disk
image. (See page 73,
Reinstalling the Hard Disk Image
While using this procedure you will be asked to log on as Administrator. The
logic analyzer is initially set up to automatically log on as Administrator (with no
password) so you may not see the login prompt. If the network setups have been
changed on your instrument, make sure that you log on as Administrator or as a
user who has administrator privileges. Failure to do so can prevent the software
upgrade from completing successfully.
1.
Log on to the instrument as Administrator and quit any applications.
2.
Install the TLA Application Software CD in the CD drive of the logic analyzer.
3.
If the installation software does not start automatically, click Run in
the Windows Start menu to display the Run dialog box. Enter D:\TLA
Application SW\Setup.exe in the Run dialog box (if your CD drive is not the
D-drive, enter the appropriate letter for your drive).
4.
Click OK to perform the installation.
If you have an older version of the software on the hard disk, the installation
program will detect it and ask if you want to remove it. Follow the on-screen
instructions to remove the software, answering "Yes" to any prompts.
5.
After the software has been successfully installed, restart the instrument.
6.
If you have installed the TLA application software on a PC for remote
operation, start the software by double-clicking on the TLA Application icon.
The TLA Startup dialog box displays.
a.
Select an instrument in the TLA Connection dialog box and the click the
Connect button. If your instrument is connected to a network, you can
connect to any instrument on your local network that has a TLA server
running, enabled, and is not currently being used by another user.
b.
Click Of
fl
ine to start an of
fl
ine version of the TLA application software.
The TLA Of
fl
ine software allows you to run the TLA application without
connecting to a real instrument. You can analyze previously acquired data
from a logic analyzer, create or modify reference memories, or perform
system tests without being connected to a real instrument.
Installing the TPI Remote Operation Software
The TPI client software package allows you to remotely control the logic analyzer
from a remote PC. This software package is located on the TLA application
76
TLA7000 Series Logic Analyzers Installation Manual
Summary of Contents for TLA7000 Series
Page 1: ...TLA7000 Series Logic Analyzers Installation Manual www tektronix com 071 1747 03 ...
Page 72: ...Basic Installation 54 TLA7000 Series Logic Analyzers Installation Manual ...
Page 88: ...Merging Modules 70 TLA7000 Series Logic Analyzers Installation Manual ...
Page 104: ...Restoring and Reinstalling Software 86 TLA7000 Series Logic Analyzers Installation Manual ...