Basic Installation
Use a screwdriver to tighten the retaining screws to 2.5 in-lbs after seating the
modules in place. (See Figure 39 on page 44.)
Figure 39: Installing modules
Covering Empty Slots
If you have any unused (empty) slots in your mainframe, install blank-slot panel
covers to meet EMC and cooling speci
fi
cations. Install a blank-slot panel cover
for the empty slot in the Portable Mainframe. (See Figure 40.) Install the blank
slot-panels on the benchtop mainframe. (See Figure 41.) Install the blank-slot
panel covers before any modules. Use only Tektronix TLA covers; otherwise the
mainframe may not meet EMC and cooling requirements.
Make sure that the EMI shielding is in contact with the adjacent panel or module
cover, and that the air
fl
ow shutter activation arms protrude through the holes
in the blank-slot panel.
44
TLA7000 Series Logic Analyzers Installation Manual
Summary of Contents for TLA7000 Series
Page 1: ...TLA7000 Series Logic Analyzers Installation Manual www tektronix com 071 1747 03 ...
Page 72: ...Basic Installation 54 TLA7000 Series Logic Analyzers Installation Manual ...
Page 88: ...Merging Modules 70 TLA7000 Series Logic Analyzers Installation Manual ...
Page 104: ...Restoring and Reinstalling Software 86 TLA7000 Series Logic Analyzers Installation Manual ...