Installation Instructions
Figure 10: Attaching the rear brackets to the instrument rails
5.
Mount the cosmetic trim on the front, using two 10-32 screws each. (See
Figure 11.) (Item 2 in this
fi
gure shows you where to locate the shelf during
shelf installation).
Install the Shelf/Track Assembly into the Rack
You will need the following tools to install the shelf/track assembly. (See Table 2
on page 9.)
One screwdriver handle (Item 1)
One number two Pozidriv tip (Item 2)
One torque driver (Item 5)
NOTE.
The rack hardware kit contains hardware for mounting the instrument in
several con
fi
gurations. Not all of the hardware in the kit is needed.
A standard equipment rack has rails with universal hole spacing. If you use a
rack with other than universal hole spacing, you may have to drill additional
mounting holes in the rack.
1.
Grab the shelf/track assembly and slide the tracks into the brackets on the rear
rails of the instrument rack.
2.
Align the front of the shelf to the bottom of the cosmetic trim on the front of
the instrument rack.
14
TLA6200, TLA6400, & TLA7012 Rackmount Kit Instructions
Summary of Contents for TLA6202
Page 2: ......
