background image

xx

Safety Summary

To avoid potential hazards, use this product only as speci

fi

ed.

To Avoid Fire or Personal Injury

Recharge battery properly.

Recharge the battery pack only

for the recommended charge cycle at the recommended
temperature.

Use proper battery charger.

Use only the THSCHG charger

or the THS3000 series oscilloscope to charge the THSBAT
Lithium-Ion battery pack.

Do not operate without covers.

Do not operate this product

with covers or panels removed.

Do not operate with suspected failures.

If you suspect there is

damage to this product, have it inspected by quali

fi

ed service

personnel.

Do not operate in wet/damp conditions.
Keep product surfaces clean and dry.
Use proper AC adapter.

Use only the AC adapter speci

fi

ed for

this product.

Safety Terms in This Manual

CAUTION.

These statements identify conditions or practices

that could result in damage to the equipment or other
property.

Safety Symbols on the Product

This symbol indicates that this product complies
with the applicable European Union requirements
according to Directives 2002/96/EC and 2006/66/EC

on waste electrical and electronic equipment
(WEEE) and batteries. For information about
recycling options, check the Support/Service section
of the Tektronix Web site (www.tektronix.com).

Description

The THSCHG is a battery charging base for use with the
THSBAT Li-ion battery packs. When used with the external
power supply for THS3000 series oscilloscopes, it will typically
charge the battery pack in approximately 5.5 hours.

CAUTION.

To avoid damage to the battery pack, use only

the oscilloscope or the THSCHG battery charger to charge
the battery pack. Do not connect any other voltage source
to the battery pack.

You do not need to continuously charge (trickle charge) Li-Ion
battery packs to maintain full operating capacity between jobs.
However, a Lithium-Ion battery pack will self-discharge while
not in use. To achieve the longest operating time, charge your
battery pack before use. If you plan to store battery packs, read
the speci

fi

c instructions to do this. (See note below.)

NOTE.

Refer to the THSBAT Rechargeable Battery Pack

Instructions (Tektronix part number 071-2960-xx) for
information on storage, transportation, and end-of-life
recycling or disposal of the THSBAT Lithium-Ion battery pack.

Charging the Battery Pack

NOTE.

For optimum performance, charge the battery pack

completely before using it for the

fi

rst time or after prolonged

storage.

CAUTION.

To avoid overheating of the batteries during

charging, do not exceed the allowable ambient temperature
given in the speci

fi

cations.

1.

Connect the oscilloscope AC adapter/power supply to a
mains outlet and insert the DC plug of the power supply
into the THSCHG External Battery Charger.

THSCHG

External Battery Charger

ZZZ

Instructions

x

*P071296100*

071-2961-00

Reviews: