Tektronix THS3014, User Manual

Page: 121 / 130

Appendix C: Probe Compensation and Compatible Maximum Voltages
Compatible Probe Maximum Voltages
WARNING.
Do not exceed the Measurement Category (CAT), voltage, altitude,
or temperature rating of the lowest rated individual component of a product,
probe, or accessory.
Table 19: Compatible probe maximum voltages
Passive probes THP0301 1 P5150 2 P5122 1 , 5
Attenuation gain setting 10x 50x 100x
Maximum input voltage 1
between tip (signal) and the
reference lead maximum input
300 V RMS CAT III 600 V RMS CAT II 600 V RMS CAT II
Input signal safety rating 300 V RMS CAT III
600 V RMS CAT II 1000 V RMS CAT II 1000 V RMS CAT II
On screen P-P voltage 3 4 849 V p-p 2828 V p-p 2828 V p-p
On screen RMS voltage 3 300 V RMS 1000 V RMS 1000 V RMS
1
Maximum operating altitude is 2000 meters.
2 The 50X probe is compatible with the THS series, but the vertical system does not allow con fi guration for 50X readouts.
3
On screen P-P and RMS voltages are based on an input signal of the maximum safety rating.
4
On screen P-P Voltages will only be as indicated if the waveform is sinusoidal.
5
The P5122 may have a warning label stating it can only be used with the TPS2000. There is an exception to this statement: the P5122 can also be used with
the THS3000 Series instruments.
THS3000 Series Oscilloscopes User Manual 105