Run Application Software
Run Application Software
The Optional Application Software CD contains free
fi
ve-time trials of optional application software that you can install on your
instrument. These applications provide application-speci
fi
c measurement solutions. Some examples are described below.
Additional packages may be available. Contact your Tektronix representative or visit our Web site at www.tektronix.com
for more information.
Use
TDSJIT3 Advanced
or
TDSJIT3 Essentials
Jitter Analysis Software to characterize timing performance. Analyze
jitter on contiguous clock cycles using single-shot acquisitions.
Use
TDSRTE
Real Time Eye Measurement Software to perform serial data compliance and analysis. These are
compliance modules for many serial standards.
Use
TDSHT3
HDMI Compliance Test Software to verify conformance to HDMI standards and test speci
fi
cations (CTS).
Use
TDSDVI
Compliance Test Solution Software for DVI physical layer compliance testing.
Use
TDSDDM2
Disk Drive Measurement Software to measure disk drive signals according to IDEMA standards.
Use
TDSDVD
Optical Storage Analysis and Measurement Software for automatic amplitude and timing measurements,
providing you with the
fl
exibility to modify signal processing blocks to maximize design performance.
Use
TDSET3
to perform 10/100/1000 Base-T Ethernet compliance testing.
Use
TDSUSB2
to characterize USB2 signals including mask testing and parametric testing.
Use
TDSCPM2
for mask and measurements compliance testing for ITU-T G.703 and ANSI T1.102 communications
standards.
Use
TDSPWR3
Power Measurement Software to quickly measure and analyze power dissipation in power supply
switching devices and magnetic components.
Use
TDSPTD
Protocol Trigger and Decode Software to trigger and decode 8 B/10 B data on high-speed serial or data
protocols. Protocol triggering up to 3.125 GS/s is available on TDS6000C instruments with Option ST. The decode
feature is available on all models.
Follow the instructions provided with the
application software to install it. To run the
software, select
File > Run Application
and
then select the application.
TDS6000B & TDS6000C Series Quick Start User Manual
81