Tektronix TD140, Hardware Maintenance Manual

Page: 10 / 49

TD140 Hardware Maintenance Guide 7.13.2 8
1
TD140 Overview Rev. 001-140228
N
ETWORK
C
ONNECTIVITY
A TD140 deployment currently requires the customer to provide two Ethernet connections and
associated addresses as described in
Table 1.1
. See Ethernet Cabling Diagram for cabling details.
Table 1.3 - TD140 Network Connectivity
Port Location Details
OAM OAM port on ShMC

Provides connectivity to Iris server for maintenance and
configuration.

Provides timing connection; can be configured as Precision Time
Protocol (PTP) or Network Time Protocol (NTP)

Supports 100/1000 Mbps Ethernet physical connections. It requires
at least 100Mbps connectivity and supports IPv6.

1G Ethernet, 1000base-T via RJ45 (single port)
Persistence Data
Port
ETH port on PPM40
Blade 1

Receives session data from the probes

ETH port on PPM40 blade 1; connects to same LAN/WAN as OAM
ports on probes

Supports 100/1000 Mbps Ethernet physical connections. It requires
at least 100Mbps connectivity and supports IPv6.

1G Ethernet, 1000base-T via RJ45 (single port)
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited