Controlling the Acquisition of Data > Using Triggers to
Capture Just What You Want > Triggering
Trigger Settings
Trigger Settings
Menu Bar: Settings > Trigger
Application Toolbar: Trig
Front Panel: Trigger
The Trigger control panel allows you to set the parameters that de
fi
ne trigger events and how the
instrument responds to them.
Trigger Modes
There are two trigger modes: Free Run and Triggered.
Mode
Description
Free Run
Acquires and displays the signal without triggering.
Triggered
Acquires a data record after the de
fi
ned trigger event is recognized.
xxx
Trigger Tabs
Use the Trigger tabs to access controls for setting the different trigger parameters.
Tab
Description
Sets parameters that control triggering on the selected trigger source.
Sets values used to adjust time of acquisition with respect to time of trigger event.
Sets controls for triggering in swept acquisitions.
Sets parameters for Save on trigger function.
xxx
Event Tab
The Event tab is used to set the parameters that de
fi
ne trigger events. The parameters that appear on the
Event tab change depending on the selected Trigger source and type.
324
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...