GP Digital Modulation > Signal Quality
Signal Quality Settings
Signal Quality Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The Setup settings for Signal Quality are accessible only when the Signal Quality display is selected.
NOTE.
You might be able to save time con
fi
guring the Signal Quality display by pressing the Standard
Settings button from the Settings control panel. This allows you to select a preset optimized for a standard
from the Select Standard dialog box. See
Standard Settings Button. (see page 256)
Settings tab
Description
Modulation Params (see
page 256)
The Modulation tab speci
fi
es the type of modulation used for the input signal and other
parameters.
Speci
fi
es settings for frequency error, measurement BW and Frequency Deviation. Each
of these settings is set internally when set to Auto. Alternatively, you can specify values
appropriate for speci
fi
c measurement needs.
The Advanced Params tab speci
fi
es frequency offset, magnitude normalization method
and allows you to swap the I and Q signals.
Find tab is used to set parameters for
fi
nding bursts within the data record.
The Analysis Time tab contains parameters that de
fi
ne the portion of the acquisition
record that is used for analysis.
The Prefs tab enables you to set characteristics of the measurement display.
xxx
250
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...