![Tektronix RSA6100A Series Help Manual Download Page 180](http://html1.mh-extra.com/html/tektronix/rsa6100a-series/rsa6100a-series_help-manual_1078169180.webp)
RF Measurements > CCDF
CCDF Settings
Item
Display element
Description
1
100%
The top of the graph represents the 100% probability that the signal will be at
or above the average signal level.
2
Power level select
Adjust to display the value of the CCDF curve at a speci
fi
c power level. The
selected power level is indicated by a small triangle on the CCDF curve.
3
CCDF value
Readout of the value of the CCDF curve at the selected power level.
4
Avg
Readout of the Average power level and the CCDF value at the Average
power level.
5
Readout Table
Readout of the CCDF curve at six points.
6
Pk / Avg
Readout of the Peak to Average power ratio.
7
Measurement time
Readout of the length of time used for the measurement. Displays
--- s
when
the Measurement time is set to continuous.
xxx
Changing the CCDF Display Settings (see page 168)
CCDF Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The control panel tabs for the CCDF Display are shown in the following table.
Settings tab
Description
Speci
fi
es the time to be measured.
Select the trace to be measured and select reference trace for display.
Speci
fi
es whether on not certain display elements are shown.
xxx
Restore defaults.
Sets the CCDF parameters to their default values.
168
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...