Tektronix RSA3303B, User Manual

Page: 72 / 79

Appendix A: Speci fi cations
Certi fi cations and Compliances
EC Declaration of
Conformity - EMC
Meets intent of Directive 2004/108/EEC for Electromagnetic Compatibility.
Compliance was demonstrated to the following speci
fi cations as listed in the
Of fi cial Journal of the European Communities:
EN 61326:1997. EMC requirements for Class A electrical equipment for
measurement, control, and laboratory use.Annex D 1 2 3
IEC 61000-4-2:1999. Electrostatic discharge immunity
IEC 61000-4-3:2002. RF electromagnetic fi eld immunity 4
IEC 61000-4-4:2004. Electrical fast transient / burst immunity
IEC 61000-4-5:2005. Power line surge immunity
IEC 61000-4-6:2003. Conducted RF immunity
IEC 61000-4-11:2004. Voltage dips and interruptions immunity
EN 61000-3-2:2002.
AC power line harmonic emissions
EN 61000-3-3:1995.
Voltage changes, fl uctuations, and fl icker
1 This product is intended for use in nonresidential areas only. Use in resdential areas may cause electromagnetic
interference.
2 Emissions which exceed the levels required by this standard may occur when this equipment is connected to a
test object.
3
To ensure compliance with the EMC standards listed here, high quality shielded interface cables should be used.
4
Performance Criteria with disturbance signal frequencies within 50 MHz of EUT Center Frequency: Residual
spurious signals can increase to -60 dBm with exposure to the disturbance levels of the test.
European Contact. For further information in Europe, contact:
Tektronix UK, Ltd.
Western Peninsula
Western Road
Bracknell, RG12 1RF
United Kingdom
Australia / New Zealand
Declaration of
Conformity - EMC
Complies with EMC provision of Radiocommunications Act per the following
standard, in accordance with ACMA:
EN 61326:1997. EMC requirements for electrical equipment for
measurement, control, and laboratory use.
60 RSA3303B, RSA3308B, and RSA3408B User Manual