Tektronix PSC1125, Instruction Manual

Page: 41 / 92

Performance Verification
PSC 1125 Digital Television Parallel-to-Serial Converter Instruction Manual
2. Set the equipment controls:
a. Set the TSG1001 generator signal output to ZONE PLATE.
b. Set the oscilloscope controls:
!
"
#
&!
$ #
"
!#
#
"!
% !
3. Check that the OUT1 eye pattern displayed on the oscilloscope is fully open.
Figure 4–3 shows an example of the eye pattern for an acceptable output
signal.