PSC 1125 Digital Television Parallel-to-Serial Converter Instruction Manual
1-1
Getting Started
This section presents information you need to set up your PSC 1125 Digital
Television Parallel-to-Serial Converter. This section contains the following
information:
Product Description
Options and Accessories
Installation
Product Description
The PSC 1125 Digital Television Parallel-to-Serial Converter converts digital
television parallel signals to digital television serial digital signals which comply
with BTA S-004A (SMPTE 292M). Because the converter accepts output signals
from the Tektronix TSG1001 Multi-format Test Signal Generator, you can
generate a digital television signal by using the converter in combination with the
generator.
. To assure proper operation of your converter, your TSG1001 Multi-format
Test Signal Generator must have a serial number of B040000 or above, or it must
be upgraded to the B040000 level with the field upgrade kit part number
040-1526-00.
See Figure 1–1 for a block diagram of the converter.
ECL to TTL
Translator
TTL to LVCMOS
Translator
HDTV SDI
Module
Serial Output
(2 Ch, 75
)
Reset Circuit
Setup Generator
(FPGA)
Parallel Input
from the
TSG1001
(Y, P
B
/P
R
)
Figure 1-1: Block diagram
Summary of Contents for PSC1125
