P5210 High Voltage Differential Probe Service Manual
v
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
Observe Maximum Working Voltage
Do not use the P5210 High Voltage Differential Probe above
1,000 V
RMS
CAT III (2,200 V
RMS
CAT II ) from ground on either
input or
±
5,600 V (DC + peak AC) between the leads.
To Avoid Fire or Personal Injury
Avoid RF Burns While Handling Probe.
To avoid RF burns, do not handle
the probe while the input leads are connected to circuits above the
voltage and frequency limits specified in Figure 1 on page 3. Use
only probe accessories that are rated for the application.
Connect and Disconnect Properly.
Connect the probe output to the
measurement instrument before connecting the probe to the circuit
under test. Disconnect the probe input and the probe ground from the
circuit under test before disconnecting the probe from the measure-
ment instrument.
Ground the Product.
This product is indirectly grounded through the
grounding conductor of the mainframe power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground.
Before making connections to the input or output terminals of the
product, ensure that the product is properly grounded.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all
ratings and markings on the product. Consult the product manual for
further ratings information before making connections to the product.
Use Proper AC Adapter.
Use only the AC adapter specified for this
product.
Do Not Operate Without Covers.
Do not operate this product with
covers or panels removed.
Avoid Exposed Circuitry.
Do not touch exposed connections and
components when power is present.
