Tektronix P5205, Instruction Manual

Page: 28 / 54

Specifications
16
P5205 Instruction Manual
Table 2: Warranted Electrical Characteristics (Cont.)
Maximum Operating Input Voltage 500X differential:
±
1.3 kV (DC + peak AC)
500X common mode:
±
1 kV
RMS
CAT II
50X differential:
±
130 V (DC + peak AC)
50X common mode:
±
1 kV
RMS
CAT II
Maximum Nondestructive Input Voltage 500X and 50X differential:
±
1.5 kV (DC +
peak AC)
500X and 50X common mode:
±
1.3 kV
RMS
CAT II
Gain Accuracy
±
3% at 20 - 30
_
C, <70% RH
Temperature Operating: 0 to 40
_
C
Nonoperating: - 30 to +70
_
C
Humidity Operating: <85% RH at or below +35
_
C
Nonoperating: <85% RH at or below
+60
_
C
Table 3: Certifications and Compliances
EC Declaration of
Conformity -- Low
Voltage Compliance was demonstrated to the following specification as
listed in the Official Journal of the European Communities:
Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC:
EN 61010-1/A2:1995
Safety requirements for electrical equipment for
measurement, control, and laboratory use
EN 61010-2-031:1994
Particular requirements for hand-held probe assemblies for
electrical measurement and test equipment
Approvals UL3111-1 - Standard for electrical measuring and test equipment
IEC 10106-2-031 - Particular requirements for hand-held probe
assemblies for electrical measurement and test
CAN/CSA-C22.2 No. 1010.1-92 and CAN/CSA-C22.2 No.
1010.2.031-94
- Safety requirements for electrical equipment for
measurement, control, and laboratory use