Tektronix MSO54, Programmer'S Manual

Page: 790 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:SIZe
This command sets the length of the data string, in bytes, to be used when
triggering on a CAN bus signal. The trigger condition must be set to
IDANDDATA or DATa (using
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition ).
The bus number is speci fi ed by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:SIZe <NR1>
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:SIZe?
Arguments
<NR1>
is the length of the data string in bytes.
Examples
TRIGger:A:BUS:B1:CAN:DATa:SIZe 2
sets the data size to 2 bytes.
TRIGger:A:BUS:B1:CAN:DATa:SIZe?
might return
:TRIGGER:A:BUS:B1:CAN:DATA:SIZE 1
indicating the data size is
set to 1 byte.
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:VALue
This command sets the binary data value to be used when triggering on a CAN
bus signal. The trigger condition must be set to IDANDDATA or DATa (using
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition ). The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:VALue?
Arguments
<QString>
is the data value in binary format. The only allowed characters in
the
QString
are 0, 1, and X.
2-774 MSO54, MSO56, MSO58, MSO58LP Programmer