Tektronix MSO54, Programmer'S Manual

Page: 672 / 1026

Commands listed in alphabetical order
NOTE.
MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Conditions Requires the SR-ENET Triggering and Analysis application.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:
DESTination:VALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:
DESTination:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition
Arguments
<QString>
is a quoted string of up to 48 characters where the allowable
characters are 0, 1, and X. The bits speci fi ed in the quoted string replace the least
signi fi cant bits, leaving any unspeci fi ed upper bits unchanged.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:ADDRESS:
DESTINATION:VALUE
"XXXXXXXX0011010111111100000001111010101011001000"
speci fi es to
use the value of XX:35:FC:07:AA:C8 hex when searching on the
Ethernet MAC address destination
fi eld.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:ADDRESS:
DESTINATION:VALUE
? might return
”XXXXXXXX0011010111111100000001111010101011001000”
, indicating a
MAC address destination fi eld value of XX:35:FC:07:AA:C8 hex.
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue
This command speci fi es the binary MAC address source value to use when
searching on an Ethernet bus signal. The search condition needs to be set to
MACADDRess
. The search number is speci fi ed by <x>.
NOTE.
MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Conditions
Requires the SR-ENET Triggering and Analysis application.
Group
Search and Mark
2-656 MSO54, MSO56, MSO58, MSO58LP Programmer