Tektronix MDO3000 Series, Service Manual

Page: 35 / 44

Replaceable Parts List
This chapter contains a list of the replaceable modules for these oscilloscopes.
Use this list to identify and order replacement parts.
Parts Ordering Information
Replacement parts are available through your local Tektronix fi eld of fi ce or
representative.
Changes to Tektronix products are sometimes made to accommodate improved
components as they become available and to give you the bene
fi t of the latest
improvements. Therefore, when ordering parts, it is important to include the
following information in your order:
Part number (see Part Number Revision Level below)
Instrument type or model number
Instrument serial number
Instrument modi fi cation number, if applicable
If you order a part that has been replaced with a different or improved part, your
local Tektronix
fi eld of fi ce or representative will contact you concerning any
change in part number.
Change information, if any, is located at the rear of this manual.
Part Number Revision
Level
Tektronix part numbers contain two digits that show the revision level of the
part. For some parts in this manual, you will
fi nd the letters XX in place of the
revision level number.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modi
fi cation (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
MDO3000 Series Mixed Domain Oscilloscopes Service Manual 21