Safety
Introduction
Connect
C-V Test
I-V Test
FAQs
Next Steps
2. The
vds-id
settings should be:
• SMU3: Provide a voltage step function for four
different gate voltages (2 V, 3 V, 4 V, and 5 V).
• SMU2: Perform a 51-point sweep of drain
voltage (0 V to 5 V) at each gate voltage. A
current measurement is made at each voltage
sweep point.
3. Change the settings as needed.
4. Select
Save .
To confi gure the test:
1. Select
Confi gure
to open the pane shown here. This is
where you de
fi
ne the test.