Tektronix KEITHLEY 2601B-PULSE-CA3 Instructions Download

Page: 1 / 4

Model 2601B-PULSE-CA3 Cable Kit

Instructions

07716

00 April 2020

*P077169000*

Keithley Instruments

28775 Aurora Road

Cleveland, Ohio 44139
1-800-

833

9200

Description

The Keithley Instruments 2601B-PULSE-CA3 BNC-to-BNC Cable Kit includes two 3.0 m 15

Ω low-inductance

cables. The 2601B-PULSE-CA3 is intended to make the FORCE HI and LO connections for a 4-wire

measurement. On the end intended for connection to the device under test (DUT), the shields are jumpered to

reduce loop inductance.

The SENSE HI and SENSE LO connections are made using the 2601B-PULSE-CA2 BNC-to-BNC Coaxial

Cables (sold separately).

This cable kit is intended for use with the Model 2601B-PULSE System SourceMeter

instrument with the

2601B-P-INT Interlock and Cable Connector Box installed.

Figure 1: Model 2601B-PULSE-CA3 Cable Kit

Summary of Contents for KEITHLEY 2601B-PULSE-CA3

Page 1: ...3 is intended to make the FORCE HI and LO connections for a 4 wire measurement On the end intended for connection to the device under test DUT the shields are jumpered to reduce loop inductance The SE...

Page 2: ...C Characteristic impedance 15 Loop DC resistance 100 m Loop inductance at 100 kHz 700 nH Individual cable diameter 2 5 mm 0 10 in Jumper length 152 mm 6 0 in Measured using a 2601B PULSE System Source...

Page 3: ...will be marked as category II or higher Unless explicitly allowed in the specifications operating manual and instrument labels do not connect any instrument to mains Exercise extreme caution when a s...

Page 4: ...omponents that are not safety related may be purchased from other suppliers as long as they are equivalent to the original component note that selected parts should be purchased only through Keithley...