Tektronix KEITHLEY 2200 Series, Programming Reference Manual

Page: 57 / 104

Commands Listed in Alphabetical Order
Examples
STATUS:QUESTIONABLE:INSTRUMENT:EVENT?
might return
0
, which would
indicate an over voltage condition.
STATus:QUEStionable:INSTrument:ISUMmary<x>:CONDition? (Query Only)
This queries the questionable condition register (QCR) summary of a channel,
where <x> is 1, 2, or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively. Only 1
and 2 are available on two channel instruments. (See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:QUEStionable:INSTrument:ISUMmary<x>:CONDition?
Returns
<NR1> is a decimal integer representation of the contents of the Questionable
Condition Register (OCR), ranging from 0 to 255.
Examples
STAT:QUES:INST:ISUMM1:COND?
might return
1
, which would indicate an
over voltage condition on channel 1.
STATus:QUEStionable:INSTrument:ISUMmary<x>:ENABle7
This command is used to modify or query the operation enable register summary
of a channel, where <x> is 1, 2, or 3. 1, 2, and 3 are channel 1, 2, and 3,
respectively. Only 1 and 2 are available on two channel instruments. (See
page 3-1,
Status and Events .)
Group Status
Syntax
STATus:QUEStionable:INSTrument:ISUMmary<x>:ENABle <NR1>
STATus:QUEStionable:INSTrument:ISUMmary<x>:ENABle?
Arguments
<NR1>
is a decimal integer representation ranging from 0 through 255. The bits of
the mask register of the Questionable Enable Register for the speci fi ed channel
are set according to this value.
Examples
STATus:QUEStionable:INSTrument:ISUMmary2:ENABle? 2
Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual 2-43