G10 Installation Guide 7.13.2
25
2
Install Hardware and Power Cabling
Rev. 005-140228
3.
Two People: Position the G10 probe in the rack and secure the front brackets to
the front of the rack post with two rackmount screws (
Figure 2.7
).
Figure 2.7 - Securing Front and Rear Brackets to Rack
4.
Secure the rear brackets to the sides of the G10 chassis using two Phillips flat
head screws (
Figure 2.7
).
5.
Secure the rear bracket to the back of the rack with two rackmount screws.
6.
Continue with
.
Secure front bracket to
rack with two rackmount
screws
Secure rear brackets to
chassis with two
Phillips flat head
screws
Rear
Bracket
Front
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
