Command Descriptions
MEASure{:PDUTycycle|:DCYCle}? (Query Only)
Traditional positive duty cycle measurement is performed. That is, the ratio
between the on time and the off time of the input pulse is measured.
Group
Measurement
Syntax
MEASure{:PDUTycycle|:DCYCle}?[ [<threshold>] [,(@{1|2})]]
Arguments
<THRESHOLD>
parameter sets the trigger levels in volts. If omitted, the auto
trigger level is set to 50 percent of the signal.
(@{1|2})
is the measurement channel:
(@1)
means input A,
(@2)
means input
B.
If you omit the channel, the instrument measures on input
A (@1)
.
Examples
MEASURE:PDUTYCYCLE?
might return
+5.097555E-001
. In this example, the
duty cycle is 50.97%
MEASure:PERiod? (Query Only)
A period time measurement is taken on a single period. Measuring time set by the
command does not affect the measurement.
The <expected value> and <resolution> are used to calculate the Measurement
Time (
Group
Measurement
Syntax
MEASure:PERiod?[ [<expected value>
[,<resolution>]][,<(@{1|2|3})>]]
Arguments
<EXPECTED VALUE>
is the expected Period,
<RESOLUTION>
is the required resolution,
<(@{1|2|3})>
is the measurement channel:
(@1)
means input A
(@2)
means input B
(@3)
means input C (RF input option).
FCA3000, FCA3100, MCA3000 Series Programmer Manual
2-83
Summary of Contents for FCA3000 Series
