Command Descriptions
Group
Format
Syntax
FORMat:TINFormation Boolean
FORMat:TINFormation?
FREQuency:BURSt:APERture
Sets the time length within a burst during which the burst frequency is measured.
Group
Sense
Syntax
FREQuency:BURSt:APERture {<Numeric value>|MIN|MAX}
FREQuency:BURSt:APERture?
Arguments
<NUMERIC VALUE>
is a number between 2E-8 (20 ns) and 2 s.
Returns
<Numeric value>
FREQuency:BURSt:PREScaler[:STATe]
The burst frequency limit is 300 MHz if the prescaler is ON and 160 MHz if
it is OFF.
Group
Sense
Syntax
FREQuency:BURSt:PREScaler[:STATe] <Boolean>
FREQuency:BURSt:PREScaler[:STATe]?
Arguments
<BOOLEAN> = (1 | ON | 0 | OFF)
Returns
1 | 0
FREQuency:BURSt:STARt:DELay
Sets the burst start delay (the time length between the burst start and the actual
start of the burst measuring time). This parameter controls the point of time when
a measurement sample is taken.
2-58
FCA3000, FCA3100, MCA3000 Series Programmer Manual
Summary of Contents for FCA3000 Series
