Command Descriptions
Syntax
SOURce:PULSe:WIDTh <Numeric value>
SOURce:PULSe:WIDTh?
Arguments
<NUMERIC VALUE>
= a number between 2E-8 (20 ns) and 2 s, in 10 ns increments.
*SRE
The SRE (Service Request Enable) command sets or queries the service request
enable register bits. This enable register contains a mask value for the bits to be
enabled in the status byte register. A bit that is set true in the enable register
enables the corresponding bit in the status byte register to generate a Service
Request.
Group
Common
Syntax
*SRE <Decimal data>
*SRE?
Arguments
<Decimal data>
= the sum (between 0 and 255) of all bits that are true. See
the following table.
Table 2-34: Service Request Enable register (1 = enable)
Bit
Weight
Enables
7
128
OPR, Operation Status
6
64
RQS, Request Service
5
32
ESB, Event Status Bit
4
16
MAV, Message Available
3
8
QUE, Questionable
Data/Signal Status
2
4
EAV, Error Available
1
2
Not used
0
1
Device Status
Returns
<Integer>
, the sum of all bits that are sent.
Examples
*SRE
? might return 16 to indicate that a message is available in the output queue.
2-100
FCA3000, FCA3100, MCA3000 Series Programmer Manual
Summary of Contents for FCA3000 Series
