Tektronix DPO2304SX Printable Help Download Page 710

Page: 710 / 920

What do you want to do next?

Learn about customizable display elements.

Go to a step-by-step procedure for displaying waveforms.

Display elements

The waveform shown below is displayed as part of the user interface (UI) application. Some terms that are useful in discussing
the UI follow.

1. Menu Bar. Access the controls for data I/O, printing, online help, and instrument functions here.

2. Buttons/Menu. Click to toggle between the toolbar and menu bar modes.

3. Multipurpose Knob Readout. Adjust and display the parameters controlled by the multipurpose knobs.

4. Display. Live, reference, and math waveforms are displayed here, along with cursors.

5. Waveform Handle. Click and drag to change the vertical position of a waveform.

6. Controls Status. Obtain a quick reference to the vertical selections, scale, and parameters. Probe status is provided for

some probe tips.

7. Readouts. The cursor and measurement readouts are displayed in this area. Measurements are selectable form the menu

bar or toolbar. If a control window is displayed, some combinations of readouts move to the graticule area.

Oscilloscope reference

678

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO2304SX

Reviews:

Related manuals for DPO2304SX

Brands by name

Popular brands

Tektronix DPO2304SX, Printable Help

Search results

Summary of Contents for DPO2304SX

Reviews:

Related manuals for DPO2304SX

Brands by name

Popular brands