Tektronix DPO2304SX Printable Help Download Page 552

Page: 552 / 920

Behavior.

■

The Waveform curve data range can be anywhere from one sample to the record length of the selected waveform.

■

The copy operation takes place after you click Copy.

■

If you select Data between cursors, another set of cursors may temporarily appear on your screen while the copy is in
progress.

What do you want to do next?

Learn about copying images.

Learn about copying measurements.

Learn about saving waveforms to a file.

Copy setup (Measurements)

From the Edit menu, select Copy Setup; then open the Measurements tab.

Overview. Use this control window to copy measurements to the clipboard for use with other applications.

To use.

1. Click the type of Measurements you want to copy.

2. For Displayed Measurements, select the Data Format.

3. Click OK.

Copying and printing

520

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO2304SX

Reviews:

Related manuals for DPO2304SX

Brands by name

Popular brands

Tektronix DPO2304SX, Printable Help

Search results

Summary of Contents for DPO2304SX

Reviews:

Related manuals for DPO2304SX

Brands by name

Popular brands