Tektronix DPO2012, Technical Reference, Page: 15 / 36

Speci fi cations
Table 4: Trigger speci fi cations (cont.)
Characteristic Description
Time range for pulse width or runt
triggering 4 ns to 8 s
The digital inputs do not support the runt trigger type
Time accuracy for Pulse Width
triggering ±2 ns
Time Resolution, Logic Type
Triggers 1 ns
Trigger Frequency Counter Provides the user a higher accuracy means of identifying the frequency of trigger signals.
Averaging takes place over a longer time span, so the number of stable digits is improved
over the Automatic Measurement of the same type
Trigger Frequency Counter
Resolution 6 digits
Trigger Frequency Counter Accuracy ±25 ppm including all reference errors and ±1 count errors
Trigger Frequency Counter
Frequency Range AC coupled, 10 Hz minimum to rated bandwidth
Trigger Frequency Counter Signal
Source Edge selected trigger source only
1
For Logic, time between channels refers to the length of time a logic state derived from more than one channel must exist to be recognized. For Events, the time
is the minimum time between a main and delayed event that will be recognized if more than one channel is used.
Table 5: Display speci fi cations
Characteristic Description
Display type Display area: 154.8 mm (6.09 inches) (H) x 87.05 mm (3.43 inches) (V), 180 mm (7.0 inches)
diagonal, 6-bit RGB full color, WQVGA (480 x 234) TFT liquid crystal display (LCD).
Display resolution 480 horizontal by 234 vertical displayed pixels
Luminance, typical Maximum 400 cd/m
2
Table 6: Input/Output port speci fi cations
Characteristic Description
Ethernet interface Available as an optional accessory: DPO2CONN module
USB interface 1 High Speed 2.0 Host and 1 High Speed Device connector (all models)
GPIB interface Available as an optional accessory that connects to USB Device and USB Host ports:
TEK-USB-488 GPIB to USB Adapter.
Control interface is incorporated in the instrument user interface.
Video signal output Available as an optional accessory: DPO2CONN module
A 15 pin, VGA RGB-type connector
Probe compensator output voltage
and frequency, typical Output voltage: 0 V to 5 V ±10%
Frequency: 1 kHz ±25%
DPO2000 and MSO2000 Series Speci fi cations and Performance Veri fi cation 7