Digianswer Bluetooth Protocol Analyser
Installation & Operation Manual
16
View setup
For each of the tabs representing a list of packets –
Baseband, LMP, L2CAP, RFCOMM
, or
SDP
– you can select
which elements should be displayed in the list view. This is
done in the
View Setup
dialog box. In the example below, the
following elements have been selected for
Baseband: Index,
Rx/Tx,
and
Packet Type
.
Hex view
The main window only shows part of what a packet contains
(except at the RFCOMM and SDP level). However, you can
view the entire contents of a packet – including packets that
were fragmented during transmission – by opening the
Packet
Hex View
dialog box. Here you can select
Hex
or
Binary
.
Furthermore, selecting
Stay On Top
will keep the dialog box in
front of any other Bluetooth Packet Analyser windows that you
open.
