Installation
Power off the instrument
Use the Shutdown button to exit the BERTScope application before powering off the instrument. Do not turn the instrument
off by holding down the front panel power button or by disconnecting the power cord.
1.
Touch
Shutdown
on the lower-right side
of the screen.
2.
Do one of the following:
Select
Power down
to close the
BERTScope application and power
off the instrument.
Select
Exit Application
to close the
BERTScope application and access
the computer desktop.
3.
To power off the instrument from the
computer desktop, close any active
applications and then push the front
panel power button.
The green power indicator on the button
will turn off and the instrument will begin
the shut down process.
4.
Disconnect the power cord from the rear
of the instrument to completely remove
power from the instrument after it shuts
down.
4
Tektronix BERTScope Bit Error Rate Analyzers Quick Start User Manual
