Tektronix AWG7 1B Series, Service Manual, Page: 62 / 174

Removal and Installation Procedures
Figure 4-2: Disassembly procedures for internal modules (bottom)
Required Equipment
Most modules in the instrument can be removed with a screwdriver handle
mounted with a size T-15, Torx screwdriver tip. All equipment required to remove
and reinstall the modules is listed in the following table.
Table 4-3: Tools required for module removal and reinstall
Item # Name Description General Tool #
1. Screwdriver handle Accepts Torx-driver bits 620-440
2. T-15 Torx tip Torx-driver bit for T-15 size
screw heads 640-247
3. T-10 Torx tip Torx-driver bit for T-10 size
screw heads
4. T-20 Torx tip
Torx-driver bit for T-20 size
screw heads
5. #1 Phillips screwdriver Screwdriver for removing
#1 size Phillips screws Standard tool
6. #2 Phillips screwdriver Screwdriver for removing
#2 size Phillips screws Standard tool
4–8 AWG7000B and AWG7000C Series Service Manual